Assembly
4
2
Attaching the brackets
□
Center a bracket (CC) against the back of the cabinet (A)
along the top edge.
Insert the short screw (BB) through the space in the
bracket (CC), and screw into the cabinet (A) using a
screwdriver.
Measure the height of the bracket (CC) from the floor
using a tape measure.
Measure this same vertical distance on the wall where
the cabinet (A) will stand against, and mark with a pencil.
Use a hammer to gently punch the anchor (DD) halfway
into the wall at the marked location. Finish screwing
in the anchor (DD) with the screwdriver.
Place a bracket (CC) flush against the anchor, and insert
the long screw (EE) through the space and into the anchor
(DD). Screw it in using the screwdriver.
□
□
□
□
□
1
□
□
Installing the shelves
□
Insert 4 shelf pins (AA) into 4 pre-drilled holes in the
upper half of the open space in the cabinet (A) at the
desired height.
Slide a shelf (B) into the cabinet (A) above the pins (AA).
Repeat with 4 more shelf pins (AA) and shelf (B) in the
lower half at the desired height.
Repeat with the remaining 4 shelf pins (AA) and interior
shelf (B) inside the cabinet (A).
□
□
□
A
BB
CC
X
A
EE
DD
CC
X
AA
B
A
