INSTALATION & ASSEMBLY:
1. Carefully unpack the fixture. Lay out all parts on a clean
surface.
2. Thread the Fixture Mounting Screws into the provided holes of
the Mounting Bracket as shown. Thread the Hex Nuts onto the
Fixture Mounting Screws, as shown. Do not tighten the Hex
Nuts at this time.
3. Pull the power Supply Wires out from the Outlet Box. Attach
the Mounting Bracket to the Outlet Box using the Bracket
Mounting Screws. Turn the swivel on the Mounting Bracket
to align it horizontally. Tighten the swivel screw
(Fig. 1)
.
4. Strip approximately ¼” of insulation from each supply and
fixture wire.
Page 5
Wall
Bracket Mounting Screw
Mounting Bracket
Fixture Mounting Screw
Power Supply Wires
Outlet Box
Fig. 1
Hex Nut
