4
Assembly
1
Attaching the left lower partition panel
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the
assembly easier. Refer to the dowel assembling guide drawings in this step for further clarification on how to properly glue in the wooden dowels.
Apply this method whenever instructed to install wood dowels
□
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty
carton to avoid any scratches.
□
Glue two wood dowels (AA) into the inner holes of the left lower partition panel (E) and attach it to the base (C) by inserting two bolts
(BB) with lock washers (CC) and flat washers (DD) through the cleat and screw into place.
2
Assembling the middle crossbar and
right lower partition panel
□
Glue two wood dowels (AA) into the drilled holes of the middle crossbar (M) at both ends and attach it to the left lower partition panel (E)
by using one bolt (BB) with the washers (CC and DD) through the cleat and screw into place.
□
Repeat the same procedure to attach the right lower partition panel (F) at the opposite end.
C
E
BB
CC
DD
AA
C
E
M
F
BB
CC
DD
BB
CC DD
AA
AA
GLU
E
X
X
FINAL
1
2
4
3
