Installation
5
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS
2
Attaching the mounting unit and
canopy to the junction box
Attach the mounting unit (AA) to the junction box (not
included) with the mounting screws (BB) and remove the
pre-installed screw collar ring.
Place the canopy (B) over the pre-installed screw collar loop
on the mounting unit (AA). Screw on previously removed
screw collar ring until 1/2 of the screw collar loop threads
are exposed.
Use a pair of pliers and a screwdriver (not included) to open
the end link of the chain (C) (opposite the light fixture). Use a
cloth on the pliers to protect the finish. Secure the chain (C)
to the screw collar loop on the mounting unit (AA). Use the
pliers and a screwdriver to close the end link of the chain.
Unscrew the screw collar ring and lower the canopy (B) over
the chain (C). Weave the electrical wires, ground wires, and
safety cable through the chain (C), screw collar loop, canopy
(B) and through the center of the mounting unit (AA).
AA
BB
1
Assembling the light fixture
Use a pair of pliers and a screwdriver (not included) to open
the end links of the chain (C). Use a cloth on the pliers to
protect the finish. Secure the chain (C) to the light fixture (A)
by looping it through the ring. Use the pliers and a screw-
driver to close the end link of the chain.
C
A
CC
NOTE:
If the wires from the fixture are the same color,
attach the side with markings or letters to the black
(positive) wire and the other to the white (neutral) wire.
3
Making the electrical connection
Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed
ground screw.
Connect the black to black (power), the white to white
(neutral), and copper wire to ground wire with the wire nuts
(CC) and secure the wire nuts (CC) with electrical tape (not
included).
AA
B
C
C
AA
A
B
