7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Standard Ceiling Mount
Routing the wires
Preparation for standard mounting
□
Route the wires exiting the top of the fan motor
assembly (E) through the decorative motor collar cover
and then the center of the canopy bottom cover (FF).
□
Make sure the opening of canopy (C) is on top and
insert the ball/downrod (B) through the canopy (C).
□
Route the wires exiting the top of the fan motor
assembly (E) through the downrod as shown.
2
1
□
Remove the canopy bottom cover (FF) from the canopy
(C) by turning the bottom cover counter-clockwise until it
unlocks.
□
Loosen the two canopy screws (DD) located in the bottom of
the mounting bracket, and turn the canopy counter-clock-
wise to remove the mounting bracket (A) from canopy (C).
Assembling the fan
□
Loosen, but do not remove, the setscrew (GG) on the collar
(II) on top of the fan-motor assembly (E).
□
Install the downrod (B) by inserting it into the motor collar
(II), and turning it clockwise until it is tight.
□
Re-tighten the setscrew (GG) on the collar (II) on top of the
fan motor assembly (E).
3
NOTE:
This fan is equipped with a safety tab (HH). Should
the setscrew (GG) ever become loose while the fan is
running in reverse, the safety tab (HH) will engage and
stop the fan from falling.
CAUTION:
To ensure wobble-free operation and to avoid
damage to the fan, the downrod (B) and the setscrew
(GG) must be completely tightened.
C
A
DD
FF
C
D
E
FF
B
B
E
II
HH
GG
