11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Hanging the Fan (continued)
Wrapping the extra wire
□
Gently wrap the excess wire around the mounting bracket,
under the receiver.
□
Secure with electrical tape.
7
NOTE:
Follow this step ONLY if you did not cut the extra length off
from the wires coming from the ceiling fan to the receiver.
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of canopy (C) with the two screws (DD)
and alignment post (KK) in the mounting bracket (A).
□
Push up the canopy (C) and turn clockwise until the align-
ment post (KK) engage to the round hole and the screws (DD)
engage to the key slots.
□
Firmly tighten the two mounting screws (DD).
□
Install the decorative bottom cover (FF) by aligning the covers
slots with screws in the bottom of the canopy (C). Rotate the
bottom cover clockwise to lock in place.
8
WARNING:
When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
WARNING:
The locking slots of ceiling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
until all four canopy screws are engaged and firmly tightened.
C
A
DD
FF
B
E
KK
