13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Light (continued)
Attaching the light kit fitter assembly
2
Ƒ
Remove one screw (PP) from the round hole in the light kit
pan, and loosen, but do not remove the other two screws.
Ƒ
Connect the blue wire exiting the bottom of the fan motor
assembly (E) with the black wire from the top of the light
kit fitter assembly (I).
Ƒ
Connect the white wire exiting the bottom of the fan motor
assembly (E) with the white wire from the top of the light
kit fitter assembly (I).
Ƒ
Push the light kit fitter assembly (I) up to the light kit pan
so that the two loosened screw heads fit into the keyhole
slots. Turn the light kit fitter assembly (I) clockwise to
secure.
Ƒ
Re-install the screw (PP) that was removed in step 1.
Ƒ
Make sure all the screws are firmly tightened.
CAUTION:
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
Installing the bulbs and glass bowl
3
Ƒ
With power off, install the two LED bulbs (L)(Max.9W,
included) by screwing into the light bulb sockets.
Ƒ
Place the bowl (J) into the light kit pan (E), by aligning the
three flat areas on the top flange of the bowl (J) with the
three raised dimples in the light kit pan.
Ƒ
Turn the bowl clockwise until it stops.
CAUTION:
Make sure the power is off before attaching or
removing the glass bowl.
WARNING:
Allow the glass bowl to cool completely before
removing.
I
F
PP
J
I
F
L
