5
Installation
1
3
Adjusting the cable length
Remove the two mounting screws (DD) from the
side of the canopy (A) and remove the mounting
plate (BB).
Attach the lampshade (F) onto the fixture body (E)
by aligning the holes in the fixture body (E) with
the holder (I) threaded onto the lampshade (F).
Secure with mounting screws (DD).
WWW.HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Press the wire restraint (B) onto the canopy (A)
to adjust the cable length (C). Loosen the
wire clamp (H) to adjust the length of the
fixture wire (D). Once the desired length is
achieved, re-tighten the wire clamp (H).
Install 60W max. A19 bulbs (not included) into
each socket of the fixture body (E).
BB
A
DD
B
C
D
2
Installing the mounting plate
Secure the mounting plate (BB) to the outlet box
(not included) with the outlet box screws (CC).
Tighten until snug.
CC
BB
Installing the lampshade
4
Installing the bulbs
F
E
DD
E
H
I
