Home Decorators Collection 1006152672 Скачать руководство пользователя страница 20

20

HOMEDEPOT.COM/HOMEDECORATORS 

Please contact 1-800-986-3460 for further assistance.

Care and Cleaning 

   Dust your fireplace regularly with a soft non-lint-producing cloth or household dusting product.
   Clean your fireplace with a gentle non-abrasive household cleaner. Dry your fireplace immediately with a soft cloth or towel. 

    The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no further 
  lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.
   Make sure the unit is turned OFF and unplugged whenever you are cleaning the heater or fireplace.

FCC/IC Information

    

                

NOTE:

 This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 

                15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
                residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
                used in accordance with the instructions, may cause harmful interference to radio communications. 
                However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
                harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  
                user is encouraged to try to correct the interference by one or more of the following measures:
 

   Reorient or relocate the receiving antenna.

 

   Increase the separation between the equipment and the receiver.

 

   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

   Consult the dealer or an experienced radio/TV technician for help.

 
 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

 
 

(1) This device may not cause harmful interference, and

 

(2) this device must accept any interference received, including interference that may cause undesired operation.

    This Class B digital apparatus complies with Canadian ICES-003.

WARNING:

 Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury.

WARNING:

 Make sure the power is turned off before proceeding with repairs. Any electrical repairs or rewiring of this unit should be 

carried out by a licensed electrician in accordance with national and local codes.  If repairing or replacing any electrical component or wiring, 
the original wire routing, color coding and securing locations must be followed. During any service of this appliance, the power to the unit 
must be turned off. First turn the main power switch to the OFF position. Then remove the electrical plug from the wall outlet. 

WARNING:

 Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, 

electrical shock and injury to persons.

WARNING:

 Do not use this fireplace if any part of it has been under water.  Immediately call a qualified service technician to inspect the 

fireplace and replace any part of the electrical system.

WARNING:

 Changes or modifications to this unit not expressly approved by the party responsible  for compliance could 

 void user’s authority to operate the equipment.

Содержание 1006152672

























Отзывы: