Home Decor DT830B, Инструкция оператора

Страница: 6 / 8

- 6 -
2. Determine whether the transistor is PNP of
NPN type and locate the Emitter, Base and
Collector leads. Insert the leads into the
proper holes of the hFE Socket on the front
panel.
3. The meter will display the approximate hFE
value at the condition of base current 10
µ A
and V
CE
2.8V.
BATTERY AND FUSE REPLACEMENT
Fuse rarely need replacement and blow almost
always as a result of operator error.
If “
” appears in display, it indicates that the
battery should be replaced.
To replace battery & Fuse (500mA/250V) remove
the 2 screws in the bottom of the case, simply
remove the old, and replace with a new one. Be
careful to observe polarity.
CAUTION
Before attempting to open the case of the
instrument, be sure to disconnect test leads from
any energized circuits to avoid shock hazard.
ACCESSORIES
Operator’s instruction manual
Set of test leads
Gift box
9-volt battery, NEDA 1604 6F22 type.