8
If DHCP is disabled, the following network parameters must be configured:
1.
Enter the IP address of the OmniTouch 5.7e by pressing the [Edit] button to the right of
the “IP Address” edit box.
The format of the IP address is a numeric address entered as four numbers separated by
periods. Press the [OK] button when complete.
2.
Enter the Port of the OmniTouch 5.7e by pressing the [Edit] button to the right of the
“Port” edit box.
The Port is used to remotely (from outside the network) update the OmniTouch 5.7e
touchscreen using HAI Automation Studio. To remotely access the touchscreen, the Port
for each touchscreen must be different and must be forwarded in the router to the IP
address of the respective touchscreen. Port numbers range from 0 to 65535.
3.
Enter the Subnet Mask of the network by pressing the [Edit] button to the right of the
“Subnet Mask” edit box.
The format of the Subnet Mask is a numeric address entered as four numbers separated by
periods. Press the [OK] button when complete.
4.
Enter the Default Gateway of the network by pressing the [Edit] button to the right of the
“Default Gateway” edit box.
The format of the Default Gateway is a numeric address entered as four numbers separated
by periods. Press the [OK] button when complete.
5.
Enter the DNS Server address on the network by pressing the [Edit] button to the right of
the “DNS Server” edit box.
The format of the DNS Server is a numeric address entered as four numbers separated by
periods. Press the [OK] button when complete.
After all network parameters have been entered or confirmed, press the “Controller” tab to
configure the connection information for the HAI controller or press the [OK] button at the
bottom of the page to save the settings and connect to the configured HAI controller.
Содержание 53A00-2
Страница 2: ...Copyright 2009 Home Automation Inc ALL RIGHTS RESERVED ...
Страница 19: ......
Страница 20: ......