ASSEMBLY
1 Assembling the Upper and Lower Body
Align the two Halves of Lower Body (C) and insert the connecting rods
on one Half into the connecting holes on the other Half. Align the two
Halves of Upper Body (B) and insert the connecting rods on one Half
into the connecting holes on the other Half. Fasten together at the
connecting loops with Plastic Ties (G).
2 Assembling the Head to the Body
Stand the Lower Body (C) section in an upright position. Insert the metal
rods attached to the bottom of the Upper Body (B) into the connecting
holes on the top of the Lower Body and fasten the sections together at the
connecting loops with Plastic Ties (G). Insert the metal connecting rods on
the bottom of the Head (A) into the connecting holes at the top of Body
then fasten them together with Plastic Ties (G).
3 Assembling the Arms to the Body
Insert the metal connecting rods on each of the Arm (D) into the
Connecting holes on the Upper Body (B). Secure the Body together at
the connecting loops with Plastic Ties (G).
4 Assembling the Hat on Top of the Head
Place the Hat Brim (E) on top of the Head then place the Hat Top (E) on top
of the Brim and make sure the connecting rods on the Hat Top go thru the
holes on the Brim and into the matching holes on top of the Head (A).
5 Securing the Snowman to the Ground & attaching Scarf
Attach the Scarf around the Snowman’s neck to desired look. Secure the
Snowman to the ground by placing the Ground Stakes (F) at four points
on the base of Snowman over the metal frame then into the ground.
