ASSEMBLY
1 Assembling the Head & Lower Body of Bottom Ghost
Insert the connecting rods on the top of the Lower Body of Bottom
Ghost (H) into the connecting holes on the bottom of the Head & Upper
Body of Bottom Ghost (F) and secure them together at the connecting
loops with the Plastic Ties (P).
2 Assembling the Letters "O"
Insert the connecting rods on the sides of each Letter "O" (D,I) into the
connecting holes on the sides of the Head & Upper Body and Lower Body
of Bottom Ghost (F,H) and secure them together at the connecting loops
with Plastic Ties (P). Note: Part D goes on the right side of the Ghost and
Part I goes on the left side of the Ghost.
3 Assembling the Letter "B" and Left Arm of Bottom Ghost
Insert the connecting rods on the Letter "B" (C) into the connecting holes
on the top of the Head and Upper Body of Bottom Ghost (F) then insert
the connecting rods on the Left Arm of Bottom Ghost (G) into the
connecting holes on the left side of the Bottom Ghost and secure all
parts together at the connecting loops with Plastic Ties (P).
4 Assembling the Support Bar to the Support Frame
Insert the bottom (straight end) of the Support Bar (J) into the top of the
Support Frame (K) then secure with the built in locking pin.
5 Attaching the Support Frame to the Lower Ghost with
"BOO" sign
Place the assembled Lower Ghost with "BOO" sign face down on the
floor. The Support Frame (K) comes with a metal swivel bar attached to
stabilize the left side Letter "O" (I). Insert the "L" shaped end of the
Support Bar (J) into the connecting hole on the Letter "B" (C) then
secure together with the Cotter Pin (M).
6 Attach the Lower Body of the Top Ghost
Insert the connecting rods on the Lower Body of Top Ghost (E) into the
connecting holes on the side of the Letter "B" (C) and secure them
together at the connecting loops with Plastic Ties (P).
7 Attaching the Top Ghost
Insert the connecting rods on the Left Arm of Top Ghost (B) into the
connecting holes on the Head and Upper Body of Top Ghost (A) and
the top of Letter "B" (C ) then insert the connecting rods on the bottom
of the Head and Upper Body of Top Ghost into the connecting holes
on the top of the Letter "B". Secure all the parts together at the
connecting loops with the Plastic Ties (P).
8 Assembling the Ground Stakes
Insert the Ground Stakes (O) over the metal ground frame loop or frame
at four corners then into the ground firmly. (see diagram below for
placement)
F
H
P
P
D
F
I
H
P
G
C
F
K
J
M
J
C
K
I
F
C
E
P
P
B
C
A
O
