Product #:
Product Name:
Pre-Lit Clear LED 3ft Porch Artificial Flocked Christmas Tree with Metal Pot
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Before You Start
1. Decide on an appropriate location for your product, please read assembly and Instruction procedure carefully.
2. Retain the instructions for future use and save the carton for storing your tree.
Assembly and Instruction Procedure:
The artificial tree comes in two sections: metal pot and artificial strung pre-lit tree with battery compartment.
No
tools required for assembly.
1. Remove all packaging (i.e. cardboard or plastic) before beginning. Remove contents from packaging.
2. Choose a location where the tree is to be displayed.
3. Put the pot base on the ground then insert the tree body into the pot firmly.
4. Gently lower all branch tips on tree. Take care not to place unnecessary pressure on the brackets during
assembly.
5. The branches on your tree can be adjusted to give your tree the desired fullness. For best results, straighten
and separate all branch tips, then bend them slightly upward.
6.
Requires three AA batteries (not included).
YOUR TREE IS NOW READY TO ENJOY!
WARNING
1. Do not place near fireplaces, candles, outdoor heaters, or other similar sources of heat.
2. Do not install near pools, fountains, tubs, sinks, or other areas of standing water that the tree may fall or
blow into.
3. Do not press or grasp bulbs during assembly or installation.
4. Make sure final assembly stable enough to hold the tree upright.
5. Do not use candles on tree. Use only with the included mini lights.
6. This product is for decoration use only. Not to be used by children as a toy. Keep out of reach of small
children.
