ASSEMBLY
1 Assembling the Legs to the Body
Insert the metal connecting rods attached to each Leg (E&F) into the
Matching holes on the underside of the Body (D) and fasten them
together at the connecting loops with Plastic Tie (I). The Legs come with
metal bars attached to stabilize the Deer. Insert the hooked end of the
metal bars into the metal nut on the opposite Leg.
2 Assembling the Head and Tail to the Body
Insert the connecting rod on the Tail (G) into the connecting hole on the rear
of the Body. Insert the connecting rods on the bottom of the Head/Neck (B)
into the connecting holes on the front of the Body.
Note:
Be sure to attach the Decorative Collar around the neck before you
attach the Head/Neck to the Body.
3 Assembling the Antlers and Ears to the Head. Securing
the Deer to the Ground
Insert the connecting rods on both the Antlers and the Ears (A & C) into
the matching holes at the top of Head (B) and fasten with Plastic Tie (I).
Note: The ears go to the outside of the Antlers. Secure the Deer to the
ground with Ground Stake (H) by placing the Ground Stakes through
each hoof then over the metal frame and into the ground.