ASSEMBLY
1 Assembling the Lower Body to the Base Stand
Insert the connecting rods on the Support Frame & Base Stand (G,H)
into the matching connecting holes at the bottom of the larger of the
Lower Halves of Body (C) then fasten them together at the connecting
loop with the Bolt & Wingnut (M). Insert the connecting rods on the
Support Frame (G) into the matching holes on the Lower Halves of
Body (C) and Base Stand (H).
2 Assembling the Lower Body
Align the Lower Halves of Body (C) with each other then insert the
connecting rods on one half into the connecting holes on the other half
and fasten together at the connecting loops with the Plastic Ties (K).
3 Assembling the Tail to the Body
Insert the connecting rod on the Tail (E) into the rear of the Lower Body
(C) and fasten together at the connecting loops with the Plastic Ties (K).
4 Assembling the Upper Body
Align the Upper Halves of Body (B) with each other then insert the
connecting rods on one half into the connecting holes on the other half and
fasten together at the connecting loops with the Plastic Ties (K).
5 Assembling the Upper Body to the Lower Body
Insert the connecting rods at the top of Lower Body (C) into the
connecting holes at the bottom of the Upper Body (B) and fasten
together at the connecting loops with the Plastic Ties (K).
6 Assembling the Fins to the Upper Body
Insert the connecting rods of the Fins (D) into the connecting holes on the
sides of the Body (B).
7 Assembling the Gift Box and Horn
Insert the connecting rods of the bottom of the Horn (A) into the
connecting holes on top of the Head (B) and fasten together at the
connecting loops with the Plastic Tie (K). Insert the metal connecting
rods on the front side of the Gift Box (F) into the connecting holes on
the Fins (D).
8 Assembling the Ground Stakes
Insert Ground Stakes (L) over the metal frame of each corner of the Base
Stand (H) then into the ground firmly.
C
H
M
G
K
C
C
E
K
B
K
B
C
K
D
B
K
A
F
D
B
L
H
