6
TROUBLESHOOTING CHECKLIST
If the item is not operating, the problem may be:
1. The power source is disabled or the cord is unplugged.
NOTE:
ONCE THE ITEM IS UNPLUGGED, THE PRODUCT WILL CEASE OPERATION.
Fuse Replacement
WARNING:
Risk of Fire: Replace only with the same size and type of fuse.
Do not replace the attachment plug. It contains a safety device (a fuse) that should not be removed. Discard product if
the attachment plug is damaged.
1. Grasp the plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
2. Open fuse cover. Slide the fuse access cover open, which is located on top of the attachment plug towards the blades
(see illustration).
3. Remove fuse carefully.
4. Replace fuse only with 3 Amp Max, 125 Volt fuse provided with product.
5. Close the fuse cover.
Lamp Replacement
Replace lamps only with LED type spare lamps provided with this product.
1. Locate the non-working lamp and pull to remove from base (unsnap base, if needed).
2. Insert new lamp into base and gently push into place.
3. Properly discard old lamp.
FREQUENTLY ASKED QUESTIONS (FAQs)
1. Can I leave it running overnight?
We recommend that you turn off while unattended. Extended use beyond 8 hours will not damage this item.
2. How much electricity does it use?
Please refer to the tag attached to the power cord.
3. What is the best way to store it?
Store dry in a bag, box or other storage container and keep in a cool, dry location.
4. My area is prone to unusually windy conditions, will this affect the product?
In order to prevent damage, we suggest you keep the product protected from high winds by simply relocating the
item to a sheltered area until wind conditions improve.
5. What if it is raining or snowing? Will this affect the product?
Operation in light weather conditions, such as a gentle rain or snowfall is fine.
6. I have extra plastic Ties. What are these for?
You may use these to further secure the product as desired.
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
