5
CAUTION:
The frame straps (Plastic ties) should not be placed around any conductor wire during assembly!
Disassembly Instructions ---
Please refer to assembly instruction above, but in reverse order.
Approximate Assembly time:10-15 minutes.
USER SERVICING INSTRUCTIONS
Fuse Replacement
WARNING:
Risk of Fire:
Replace fuse only with 3 Amp Max, 125 Volt fuse (provided with
product).
WARNING:
Risk of Fire:
Do not replace the attachment plug. It contains a safety device
(fuse) that should not be removed. Discard product if attachment plug is damaged.
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the
cord.
2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards blades (see illustration).
3. Remove fuse carefully.
4. Replace fuse only with same size and type of fuse.
5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug.
To replace lamp:
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Pull lamp and plastic base straight out of lampholder.
3. Replace lamp with 4.5 Volt, 0.09 Watt or 3.0 Volt, 0.072 Watt steady lamps (provided with product). If the new
lamp base does not fit in lampholder, follow the steps below before step 3.
a. Remove the base of burned out lamp by straightening lamp leads and gently pull lamp out.
b. Thread leads of new lamp through holes in old base with one lead in each hole.
c. After lamp is fully inserted into base, bend each lead up, like other lamps in the light set so that the leads will touch
the contacts inside the lampholder.
4. The lamp base of the individually-flashing lamps is not intended to be exchanged with another lamp.
CAUTION
1. Risk of fire. This product does not contain lamp shunts; it cannot operate if one lamp burns out. Do not replace lamps
with lamps other than the spare lamps provided with this product.
2. To reduce the risk of fire and electric shock: a)Do not install on trees having needles, leaves or branch coverings of
metal or materials which look like metal. b)Do not mount or support strings in a manner that can cut or damage wire
insulation.
CAUTION
1. This product contains lamps of two different sizes. To reduce the risk of overheating do not replace steady illuminating
lamps with flashing lamps.
2. Use 4.5 Volt, 0.09 Watt or 3.0 Volt, 0.072 Watt steady lamps.
WARNING
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
Do not remove light string from the product and hang on trees or other places for decoration.
STORAGE
Do not discard the box, it can be used to store the product. Store in a cool, dry location.
