Step 1.
Step 2. Insert the stakes (C) into the ground so the tethers (B)
are taut.
Step 3.
sealed weight-bag. Adjust weight-bag to position your
(A) as desired.
i. For a permanently connected power unit marked in
accordance with 65.2:
WARNING:
Risk of Electric Shock. When used
outdoors, install only on a circuit protected by a Class A GFCI.
j. WARNING: Risk of Fire. Installation involves special wiring
methods to run wiring through a building structure. Consult
k. For a unit intended to be mounted greater than 0.30 m (1
foot) from the ground surface:
WARNING:
Risk of Electric Shock. Mount the unit
at a height greater than 1 foot from the ground surface.
SAVE THESE INSTRUCTIONS
-
This manual contains important safety and operating
instructions for power units.
NOTE:
unzip the zipper on the unit after you unplug it.
For indoor and outdoor use.
WARNING:
This device complies with Part 15
of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION:
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and Used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Operation
Pre-Operation (continued)
Care and Cleaning
Troubleshooting
Operation (continued)
MADE IN CHINA
PRINTED IN CHINA
DISTRIBUTED BY:
HOME DEPOT
2455 PACES FERRY RD., N.W.
ATLANTA, GA 30339
FOR ASSISTANCE, CALL:
1-877-527-0313
a. Wipe the unit with a damp cloth and allow the unit to dry
before storing. If necessary, you can use a mild detergent.
b. Store the product neatly in a cool, dry location protected
from sunlight.
c. Carefully remove the product from wherever it is placed.
This helps to avoid any undue strain or stress on the product
conductors, connections, and wires.
a. Ensure that the zipper on the unit is completely closed.
b. The power source is disabled or the cord may be unplugged.
c. Something may be blocking the fan’s air intake.
Problem: The unit is torn.
a. You can hand sew tears with any type of thread or use clear
packing tape to cover the tear.
Problem: There is a delay after pluging in the adapter.
a. This is a protective feature built in to these adapters to
protect your electrical circuit and the product. A 2-3 seconds
start-up delay is normal.
B
A
A
B
C
HOMEACCENTSHOLIDAY.COM
36681
SKU #:
1001300398
Model #:
