Safety Information
Installation
Pre-Operation
Package Contents
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should
always be followed, including the following:
a.
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b.
burns, personal injury, and electric shock, it should not be
played with or placed where small children can reach it.
c. Do not use products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a
d. Not recommended for children under 3 years of age. As
with all electrical products, precautions should be observed
during handling and use to reduce the risk of electric shock.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified per-
sons in order to avoid a hazard.
e.
Adults Note:
Periodically examine this product for damage
to the cord, housing or other parts that may result in the risk
do not use it.
f.
DANGER
– To prevent electric shock, do not immerse in
water; wipe clean with damp cloth. Immersing this product
can result in an electric shock.
g. This product is not intended for permanent installation or
use.
h. Do not mount or place near gas or electric heaters,
i. Do not secure product wiring with staples or nails or place
on sharp hooks or nails.
j. Do not let lamps rest on the supply cord or on any wire.
k. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
l. Do not use this product for other than its intended purpose.
m. Do not hang ornaments or other objects from cord, wire, or
light string.
n. Do not close doors or windows on the product, or extension
cords, as this may damage the wire insulation.
o. Do not cover the product with a cloth, paper, or any material
not part of the product when in use.
p. Do not place the product against carpeting, furniture, or any
other fabric when in use.
q. Read and follow all instructions that are on the product or
provided with the product.
r.
SAVE THESE
INSTRUCTIONS
Preparing for Installation
Step 1. Remove contents from packaging.
Step 2. Remove all plastic fasteners and tags. These are part
of the packaging and should be discarded.
Step 3. Connect adapter into connection of fan
Securing the unit to the ground
Step 1. Zip zipper at base of fan. Inflatable unit (A) will then
Step 2. Using the loops attached at the bottom of the
unit (A), insert stakes (C) into the ground.
This power unit is intended to be correctly orientated in a
When using electrical products, basic precautions should
always be practiced including the following:
a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b. Read and follow all instructions that are on the product or
provided with the product.
c. For a cord-connected or direct plug-in power unit, do not
use an extension cord.
d. Reference the National Electrical Code, ANSI/NFPA 70,
specifically for the installation of wiring and clearances
from power and lighting conductors.
e. Installation work and electrical wiring must be done by
f. For a cord-connected or direct plug-in power unit, do not
install or use within 10 feet of a pool.
g. For a cord-connected or direct plug-in unit, do not use in a
bathroom.
h. For a direct plug-in or cord-connected power unit marked
in accordance with 65.2:
WARNING:
Risk of Electric Shock. When used
outdoors, install only to a covered Class A GFCI
protected receptacle that is weatherproof with the power unit
connected to the receptacle. If one is not provided, contact
power unit and cord do not interfere with completely closing
the receptacle cover.
Part
Description
Quantity
A
1
B
Tethers
4
C
Stakes
8
D
1
POWER SUPPLY:
Input: 120V ~ 50/60Hz Output: 12.0V 1500mA
INFLATABLE
INSTRUCTIONS
A
C
-
+
UL- listed Power supply
