Care and Cleaning
Troubleshooting
MADE IN CHINA
PRINTED IN CHINA
DISTRIBUTED BY:
HOME DEPOT
2455 PACES FERRY RD., N.W.
ATLANTA, GA 30339
FOR ASSISTANCE, CALL:
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
a. Wipe the unit with a damp cloth and allow the unit to dry
before storing. If necessary, you can use a mild detergent.
b. When the product is placed on a live tree, the tree should
be well maintained and fresh. Do not place on live trees in
which the needles are brown or break off easily. Keep the
tree holder filled with water.
c. If the product is placed on a tree, the tree should be well
secured and stable.
d. Before using and reusing, inspect the product carefully.
Discard any products that have cut, damaged or frayed wire
insulation cords, cracks, lamp holders or enclosures, loose
connections, or exposed copper wire.
e. When storing the product, carefully remove the product from
wherever it is placed, including trees, branches, or bushes, to
avoid any undue strain or stress on the product conductors,
connections and wires.
f. When not in use, store neatly in a cool, dry location protected
from sunlight.
To reduce the risk of fire and electric shock:
1. Do not install on trees having needles, leaves or branch
coverings of metal or materials which look like metal.
2. Do not mount or support wires in a manner that can cut or
damage wire insulation.
Problem: The unit is not inflating.
a. Ensure that the unit is plugged in.
b. Check for and remove any debris from the motor.
c. Ensure that the zipper on the unit is completely closed.
d. If the outdoor temperature is below 14° F (-10° C), the motor
does not work until the outdoor temperature increases.
Problem: The unit is torn.
a. You can hand sew tears with any type of thread or use clear
packing tape to cover the tear.
Problem: The unit deflates after unplug.
a. The unit will not stay inflated unless it is plugged in and the
fan is blowing air.
Problem: I have stored my Airblown
®
Inflatable for several
months and now the motor does not work.
a. Sometimes the air intake may be blocked by loose grass/
leaves or other particles. Gently shake, knock or tap the
motor and see if it will operate again.
Model #:
227192
WARNING:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and Used in accordance with the instructions, may cause
harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
