Step 6: Push the Heater Head onto the Top tube and fix in
position using 2 pcs
φ
4*8mm screws.
Step 7: Raise or retract the top tube to the desired height and
tighten to the middle tube by screwing knob down.
Step 8: Fix the power cord on the base by using 4 pcs M4
Screws.
Complete!
OPERATING INSTRUCTIONS
Connect the power cable to a 13 amp supply that is located in a
safe, dry area.
WARNING: The heater must be properly installed before it is
used.
Plug the Patio Heater into a grounded 120V, 60Hz power
outlet
Only operate the heater when it is in the upright position.
Our Electric Patio Heater is equipped with Three heat
settings power of the heater.
The switch on the heater head is used to control the three
heat settings. (I) for 700w – (II) for 800w – (I&II) for 1500w.
The 0 position is off.
Although the patio heater is shower proof, do not use when
