1
2
4
3
3. Tighten a
Ø10 lock nut
to one end of the Ø12 rod.
4. Slide a
Ø12 washer
onto the Ø12 rod from other side.
1. Fit the both ends of
boom linkage
into the slots in each boom.
2. Insert the
Ø4x16 screw through the
hole
on the boom and into
the boom
linkage
,
tighten the screw. Repeat
for the other side.
3. Fit hte
bucket assembly
to the
vehicle body,
4. Insert the
Ø8 rod
through the hole on
the boom, the hole on the vehicle
body and out through the hole in the
other boom.
Assemble the Thumb Bucket-3 │ 23
The follow steps are only for TYPE B.
to be continued...
TYPE B
