2. operating instructions
：
(1) Control panel schematic diagram
；
Turn on the power switch
ON/STANDBY:
1.1Click on the key to boot, if no other operation, the default is high-grade gear mode
(default temperature is 24
℃
), open key icon highlight, digital tube display "24
℃
"; at the
same time 5 other key lights low light.
1.2 Click on the key again, the product into standby state ,5 key lights and digital tube
extinguished, only on the key icon light low light
1.3 Switching function under normal condition, machine memory before shutdown without
power off (timing function not memory);
MODE:
2.1The mode key switch follows the order of high →low →middle→ high →low... gear
cycle. The middle one of the three digital tubes displays the "3→1→2→3→1..." gear cycle
in turn.
2.2 When the mode is set and set, the indicator light in the middle of the mode key is
highlighted, and a bit in the middle of the digital tube shows the current setting gear. When
the mode is set for 5 seconds, the three-digit digital tube is changed to display the set
temperature value ;
2.3 in which the low, middle and high three gear is the gear mode, when in these three
modes, the temperature can be set in the range of 7-35
℃
, according to the set tempera-
ture and the current set gear of the heating pipe can be controlled according to the set
temperature and the NTC probe temperature. The method is to set the control temperature
of the current mode through the point temperature key, adjust and press /- key
Mode
Decrease
Increase
ON/STANDBY
Temperature
Timer
Display
screen
EN-4
