- 3 -
HANDLE ASSEMBLY:
Attach handle with the supplied hardware
BOLTS
BOLTS
ROLLING CABINET
TOP CHEST
MAINTENANCE
Ball-Bearing Slides
Note: Unload drawer prior to drawer removal.
Never overload drawers.
To remove drawers and slides, pull drawer all the way out, depress the black drawer
release levers on each slide. For ball-bearing glides, there is one black lever per slide. One
black lever will be pushed down and the
other will be pushed up for drawer removal. After levers are pushed, the drawer is released.
Pull out drawer all the way for removal.
To re-install the drawer, insert guides on drawer side into slides and firmly close drawer all
the way.
To maintain the smooth and quiet operation of the ball-bearing slides, lubricate the exten-
sion track that houses the ball bearings every 3-6 months with a high quality jelly-like
petroleum based lubricant.
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint finish can be cleaned with spray
wax. Lightly spray the wax on the surface, and gently wipe with a soft, dry microfibre cloth.
Window cleaner and a soft cloth dampened with water can be used to clean the finish on a
regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before shipment; however,
mechanisms such as drawer slides and locks may shift during transit. Should any of these
items not operate correctly, please call customer assistance at 1-800-674-6625.
LEFT DRAWER RELEASE
LEVIER DE TIROIR GAUCHE
PALANCA DEL CAJÓN IZQUIERDO
LEFT DRAWER RELEASE
LEVIER DE TIROIR GAUCHE
PALANCA DEL CAJÓN IZQUIERDO
RIGHT DRAWER RELEASE
LEVIER DE TIROIR DROIT
PALANCA DEL CAJÓN DERECHO
RIGHT DRAWER RELEASE
LEVIER DE TIROIR DROIT
PALANCA DEL CAJÓN DERECHO
PRODUCT MADE IN CHINA
PRODUIT FABRIQUÉ EN CHINE
PRODUCTO FABRICADO EN CHINA
