SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
12
WEWA1216SET
SAFETY
This section contains information and important notes on safe start-up and handling of the
product.
For your own safety, read these operating instructions carefully before putting the
product into operation. This will enable you to handle the product safely and prevent
misunderstandings as well as personal injury and damage to property. In addition,
observe the symbols and pictograms used on the product as well as the safety and
hazard information!
11.1
Intended use of the product
The product is intended exclusively for the following operations: Storage of tools and solid, non-
flammable objects as well as work surface / work bench within the specified technical limits.
HOLZMANN MASCHINEN
assumes no responsibility or warranty for any other use or use beyond this
and for any resulting damage to property or injury.
11.1.1
Technical restrictions
The product is intended for use under the following ambient conditions:
Rel. Humidity:
max. 90 %
Temperature (Operation)
-10° C bis +40° C
Temperature (Storage, Transport)
-20° C bis +50° C
11.1.2
Prohibited applications / Hazardous misapplications
-
Operating the
product
without adequate physical and mental aptitude
-
Operating the
product
without knowledge of the operating instructions
-
Changes in the design of the
product
-
Transporting persons
-
Using the product on trucks or any other moving objects
-
Using the
product
as a climbing aid (ladder)
-
Using the
product
on ramps and inclines
-
Operating the
product
outside the technical limits specified in this manual
-
Remove the safety markings attached to the
product
-
Modify, circumvent or disable the safety devices of the
product
The improper use or disregard of the versions and instructions described in this manual will result
in the voiding of all warranty and compensation claims against Holzmann Maschinen GmbH.
11.2
User requirements
The product is designed for operation by one person. The physical and mental aptitude as well as
knowledge and understanding of the operating instructions are prerequisites for operating the
product. Persons who, because of their physical, sensory or mental abilities or their inexperience or
ignorance, are unable to operate the product safely must not use it without supervision or
instruction from a responsible person.
Please note that local laws and regulations may determine the minimum age of the operator and
restrict the use of this product!
Put on your personal protective equipment before working on the product.
11.3
General safety instructions
To avoid malfunctions, damage and health hazards when working with the product, the following
points must be observed in addition to the general rules for safe working:
•
Before start-up, check the
product
for completeness and function.
•
Choose a level, vibration-free, non-slip surface for the installation location.
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
Ensure a clean working environment.
•
The
product
may only be operated, serviced or repaired by persons who are familiar with it
and who have been informed of the hazards arising from this work.
•
Wear suitable work clothing and footwear.
•
Always work with care and the necessary caution and never use excessive force.
•
Do not work on the
product
if it is tired, not concentrated or under the influence of
medication, alcohol or drugs!
