DISPOSAL
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
Seite 16
Elektroden Inverter Schweissanlage / electrode inverter welding unit
EISA162 / EISA200
A negative connection
B positive connection
11.8
Description of the function
a. Before welding, the operator should read the operation instructions and uses the welder cor-
rectly according to the process specification.
b. Checking the welder appearance for deformation and damage.
c. For the safety of the equipment and the persons, the customer must correctly make grounding
or protecting according to the power supply system: using 4 mm2 lead to connect the protection
grounding of the welder.
d. Welding operation should be carried out in dry and good ventilating area. The surrounding ob-
jects should be not less than 0.5m away from the welder.
e. Checking the welder output connector for tightness.
f. The welder can not be moved or the cover can not be opened during the power is on and weld-
ing operation is carried out.
g. The welder should be cared, used and managed by specialized person.
h. Confirming that the power source is single phase and 230V±10%. Current of the distribution
board: 5KVA.
It can not be connected with 400V power absolutely.
12
DISPOSAL
DO NOT dispose your EISA162 / EISA200 in the residual waste! Contact your
local authorities for information about best available disposal possibilities in
your area. Drain fuel from the fuel tank completely before disposing the ma-
chine. Disaggregate the compactor into its components before disposing its
components.
