HOLZMANN MASCHINEN USK 2760, Руководство пользователя

Страница: 13 / 22

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 13
MASCHINENTYPE
The locally applicable laws and regulations may specify the minimum age of the
operator and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Read the manual carefully and get familiar with all components before operating the
machine for the first time.
 This manual contains important information for correct operation of the machine.
 This manual is part of the machine and shall be stored for later reference. Add this manual
to the machine if handed to 3rd persons for use.
 Stick to these Security Warnings and Instructions to reduce the risk of serious injuries.
 Assure that the working area is sufficiently lighted!
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid slippery
floor.
 Provide good stability and keep balance all times
 Avoid abnormal working postures! Make sure you stand squarely and keep balance at all
times.
 Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under the influence
of alcohol, drugs or concentration influencing medicaments is forbidden.
 Each time you work with an electrically operated machine, caution is advised! There is a
risk of electric shock, fire, cutting injury.
 Avoid body contact with earthed
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and gases (danger
of explosion)
 Check the cable regularly for damage
 Use the correct power tool
 When working outdoors non-slip footwear is recommended.
 Always disconnect the machine prior to any actions performed at the machine.
 Do not use the machine with damaged switch
 Never use the power cord for transportation or manipulation of the machine!
 Protect the cable from heat, oil and sharp edges
12.4 Remaining risk factors
W A R N I N G
It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is
required. A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
Despite of correct and proper use and maintenance there remain some residual risk factors:
 Risk of injury to the hands / fingers by the rotating tool during operation.
 Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a
suitable tool / device workpiece.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contact with live electrical components.
 Risk of injury due to breakage or cracking of the abrasive
 Risk of injury due to dust emissions, treated with harmful agents workpieces
 Risk of injury to the eye by flying debris, even with safety goggles.
 Risk of injury to the hearing by prolonged labor without hearing protection.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.