HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
12
UFE410FLEX
OPERATION
Moving the machine:
In order to move the machine, which is fixed to the product, the drive unit must be raised by
pressing down the two lifting/lowering levers, thus preventing contact between the floor and the
stopper.
Lock the machine in position:
In order to fix the machine fixed to the product in its desired position, press the two
lifting/lowering levers up to lower the machine and restore contact between the floor and the
stopper.
C A U T I O N
Always lower both lifting/lowering levers to ensure suitable stability
CLEANING AND MAINTENACE
N O T E
Incorrect cleaning agents can attack the product or parts of the product. Do not use
abrasive cleaning agents or solvents that could damage the rubber or plastic parts of
the product. Observe the information and instructions of the cleaning agent
manufacturer!
•
Check the screw connections regularly for damage or tightness.
STORAGE
N O T E
Improper storage can damage and destroy the product. Store the packed or
unpacked product only under the intended ambient conditions!
In case of a longer interruption of operation or shutdown, clean the product thoroughly and then
store it out of the reach of children in a dry environment protected from frost and other weather
influences!
DISPOSAL
Observe the national waste disposal regulations. Never dispose of the
product, product components or equipment in residual waste. If necessary,
contact your local authorities for information on the disposal options
available.
If you buy a new product or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old product properly.