OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
32
OBF1200
Press the spindle lock (1
2
) and allow the spindle to engage by turning it at the same time.
Loosen the clamping nut (
10
) with the spanner (
22
).
Remove the cutter to be dismantled if necessary from the collet (
23
)
Select the suitable for your application and milling chuck.
Now put the collet (2
3
) and nut into the spindle (
10
) a.
Insert the shank of the cutter into the collet Run.
Press and hold the spindle lock (
12
).
Tighten the clamping nut (10) with the spanner (
22
).
The cutter must be inserted at least 20 mm wide into the collet chuck (2
3
).
Before putting the device into the tight fit and concentricity of the mill!
Adjusting the end stops (Fig. 13/ Pos. 15)
The end stops (1
5
) can be adjusted in height according to requirements. To do this, loosen the
lock nut on the stop (
15
) and turn it with a screwdriver to the desired stop level.
12.2
Operation
ATTENTION
Before commissioning, remove adjustment and assembly tools.
-
Do not use poor quality or damaged cutters. Only use cutters with a shank diameter of 6 -
8mm. The router must also be rated for the idling speed.
-
Secure the workpiece to be machined so that it can not be thrown during the operation. Use
clamps.
-
Run the power cord to the rear away!
-
Milling Never on metal parts, screws, nails, etc.
ON / OFF switch (Fig. 16 / Pos. 4)
Press the safety lock-off (
5
) and then press the
ON / OFF
switch (
4
) to switch on the machine.
Release the
ON / OFF
switch to switch off the machine.
Speed control (Fig. 17/ Pos. 11)
The appropriate speed depends on the material to be worked and the diameter of the cutter.
Use the switch speed control (11) has a speed in the range 11000-30000 min
-1
. You can choose
from 7 different switch positions.
The speeds in the various switch positions are as follows:
switch position 1: ca. 11.000 min
-1
(minimum speed)
switch position 2: ca. 12.000 min
-1
switch position 3: ca. 15.000 min
-1
switch position 4: ca. 18.000 min
-1
switch position 5: ca. 22.000 min
-1
switch position 6: ca. 26.000 min
-1
switch position 7: ca. 30.000 min
-1
(maximum speed)
Содержание OBF 1200
Страница 13: ...ILLUSTRATION HOLZMANN MASCHINEN GmbH www holzmann maschinen at 13 OBF1200 ILLUSTRATION ...
Страница 14: ...ILLUSTRATION HOLZMANN MASCHINEN GmbH www holzmann maschinen at 14 OBF1200 ...
Страница 98: ...HOLZMANN MASCHINEN GmbH www holzmann maschinen at 98 OBF1200 47 2 Explosionszeichnungen Explosion drawing ...
Страница 109: ......
