HOLZMANN MASCHINEN NTS 250, Руководство пользователя

Страница: 18 / 83

ASSEMBLY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 18
NTS 250 / NTS 250PRO
Even if the machine is used as required it is still impossible to eliminate certain residual risk
factors totally. The following hazards may arise in connection with the machine´s construction
and design:
 Risk of injury to the hands / fingers by the rotating grinding- / polishing wheels during
operation.
 Risk of injury due to sharp blades of the sharpened tools or knifes.
 Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety
regulations must be observed with regard to clothing.
 Risk of injury due to contacting with live electrical components.
 Risk of injury to the eye by flying debris, even with safety goggles.
These risk factors can be minimized through obeying all security and operation instructions,
proper machine maintenance, proficient and appropriate operation by persons with technical
knowledge and experience.
12 ASSEMBLY
Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
Grinding wheel:
Place the grinding wheel on the left side of drive shaft
and fix with washer and nut.
Polishing wheel:
 Place polishing wheel (covered with leather) on the
right side of the drive shaft
 Mount the polishing wheel so that the slots engage
on the wheel and shaft into each other.
 Fix the polishing wheel with fixing screw and washer.
Water reservoir:
The water reservoir is equipped with mounting tabs
used to hook to the slots on the grinder body.