HOLZMANN MASCHINEN KF 200L, Руководство пользователя

Страница: 29 / 56

ASSEMBLY
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Seite 29
Kreissäge – Fräse / circular saw – spindle shaper combination KF 200L
14.1.3 Preparation of the surface
Eliminate the preservative, which is applied for corrosion protection of the parts without painting. This
can be done with the usual solvents. Here no nitro solvent or similar means, and in no case use
water.
N O T E
The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners will result in
damage to the surface!
Therefore:

When cleaning, use only mild detergent
W A R N I N G
Improper lifting of heavy loads:
Lifting bracket by unqualified personnel can cause serious injuries and damage to the
machine!
Therefore:

Lifting heavy weights only by qualified personnel

When lifting ensure that the path is clear
14.2 Assembly
- Set machine on a flat, level surface
- Feet (A) mounted on the base frame
- Align the machine horizontally by adjusting the
leveling feet
W A R N I N G
The forks of the forklift must be at least 1200 mm long.
Check to see if the eyes are well attached to the body of the machine.
The lifting and transportation of the machine must be performed by quali-
fied personnel with the appropriate equipment.
A