HOLZMANN MASCHINEN FSP 130, Руководство пользователя

Страница: 22 / 33

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at Seite 22
Farbspritzpistole / Solenoid Sprayer FSP 150
10.4 Residual risks
Despite its intended use, certain residual risk factors can not be completely eliminated. Due to
construction and design the device can perform the following risks occur:
 Risk of shortages of the device
If one or more parts fault of the equipment, the use of the appliance is prohibited. Defective parts
must be replaced immediately. Only manufacturer-approved replacement parts are used.
Modifications on the device are forbidden. Check each time before the machine is in perfect
condition!
 Risk of electric shock
Operate the unit only to a power source, which is protected by an RCD! Outlets must be properly
installed, grounded and checked! Check the plug and supply current network only by an
electrician!
 Danger due to unintentional switching on the device.
Avoid accidental starting. Make sure that the switch is in the "OFF" position is before you insert
the plug into the socket.
10.5 In an emergency
N O T I C E
Emergency procedure
A first aid kitin accordance with DIN13164shouldalwaysbe readily
availablefor apossible accident. Initiatetheviolationin accordance with
thenecessaryfirst aidmeasures. Whenrequesting support,provide the
following details:
1. Place ofaccident 2. Type ofaccident
3. Numberofinjuredpeople 4. Injury type(s)