HOLZMANN MASCHINEN Austria www.holzmann-maschinen.at
Page 35
SOUSTRUH NA KOV ED1000KDIG / METAL TURNING LATHE ED 1000KDIG
12.2.2
Transport / unloading the machine
To transport the machine is best suited to a sling with sufficient capacity. Place the belt slip grip
around the machine and make sure that it can not be damaged. Lift the metal lathe carefully with
the help of a crane or other suitable lifting device on. Is recommended when lifting with belts to
use hooks. Align the belt length so that, when lifting the machine is level and stable. Avoid the
use of slings, as they risk damaging the feed rod or lead screw. Lift the lathe and carefully place
it on the floor. (see 12.2.1)
W A R N I N G
Vergewissern Sie sich ebenfalls, dass der Aufstellort dem Gewicht der Ma-
schine standhält, speziell bei Aufstellung der Maschine oberhalb des Erdge-
schoß. Check that the belt on the body of the machine are well secured.
The lifting and transportation of the machine may only be carried out by
qualified personnel carried out with appropriate equipment.
Note that the selected lifting equipment (crane, forklift, sling, etc.) are in
perfect condition.
Also make sure that the location of the weight of the machine can withstand,
especially when installing the machine above the ground floor.
To maneuver the machine in the packaging is also a pallet truck or a forklift can be used.
12.3
Assembly
12.3.1
Cleaning
Remove the anti-corrosion protection and grease before putting the machine through kerosene
(paraffin) or turpentine of all tours and the transmission. Do not use thinner or other strong sol-
vents. Lubricate all the bright faces of the machine directly after its cleaning. Do not use heavy oil
or grease for the gearbox.
12.3.2
Installation
Place the lathe on a solid surface. A concrete floor is the best foundation for the machine, if nec-
essary, use a base. Make sure that you have enough space around the machine to optimally op-
erate and maintain. Adjust the guides exactly a bed, then tighten the foundation bolts evenly and
finally check the stand