OPERATION
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
32
BT 46
14.3.5
Round parts with sanding disc
For sanding round parts, hold the workpiece firmly with both hands and exert slight pressure only
on the left, down running side (otherwise there is a risk of thrown workpieces) of the sanding disc
(fig.p).
14.3.6
End sanding and mitre sanding with sanding disc
For end sanding and mitre sanding use the mitre auger (fig.q.) and work like the capture before.
14.3.7
Dustextraction
The connecting stub (60mm Ø) for the dustextration is on the left side below the table.
