HOLZMANN MASCHINEN AKS 45IND, Руководство пользователя

Страница: 18 / 31

SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at 18
AKS 45IND
10 SAFETY
10.1 Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the
assembly instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
for tightening and undoing screws, for drilling in wood, metal and plastic, and for impact drilling
in stone, bricks and masonry in each case when using the appropriate bits.
This machine is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the machine by a person responsible for their safety.
Never allow children or people unfamiliar with these instructions to use the machine. Supervise
children. This will ensure that children do not play with the machine.
Any manipulation of the machine or its parts is a misuse, in this case HOLZMANN-
MASCHINEN and its sales partners cannot be made liable for ANY direct or indirect
damage.
W A R N I N G

Use only drills / bits allowable for this machine!

Never use a damaged drills / bits!
HIGHEST RISK OF INJURY!
Ambient conditions:
The machine may be operated:
humidity max. 70%
temperature von +5°С bis +40°С
The machine shall not be operated in areas exposed to increased fire or explosion hazard
Prohibited use:
 The operation of the machine outside the stated technical limits described in this manual is
forbidden.
 The use of the machine not according with the required dimensions is forbidden.
 The use of the machine not being suitable for the use of the machine and not being certified is
forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is forbidden.
 It is not allowed to leave the immediate work area during the work is being performed!