Holybro Kopis 2, Руководство пользователя и инструкция по установке

Страница: 8 / 16

P a g e | 6 KOPIS 2
5. While holding down the bootloader button on the Kakute F7, plug it into your PC via USB. The
ImpulseRC Driver Fixer should complete successfully. The bootloader button is quite small. Use a
plastic tool to press it. If you use a metal tool like a screwdriver tip, be careful not to damage it.
Use the flat of the tool and not the tip.
Is It Over Yet?
THAT WAS SUPER ANNOYING WASN’T IT. Yes… we know.
The good news is, you do not need to repeat this process again. Sort of. You never need to install the
drivers again on this computer, unless you reinstall the operating system for some reason. If you use
another computer for the first time, you will need to install those drivers on it. Also, you may need to re-
run the ImpulseRC Driver Fixer sometimes when you go to flash the board. If you try to flash the board
and it fails, repeat steps 4 and 5 above.
The Bootloader Button