Holybro Kopis 2, Руководство пользователя и инструкция по установке

Страница: 7 / 16

P a g e | 5 KOPIS 2
Install Betaflight
Although your KOPIS comes from the factory nearly completely ready to fly, you still need to install the
Betaflight configurator on your computer so that you can make sure your transmitter is configured
correctly. If you purchased the Plug-N-Fly version of the KOPIS, you also may need to use the
configurator to bind your receiver.
Installing Drivers
In order to connect to your KOPIS, you must get the Betaflight drivers installed on your computer. If you
are on MacOS or Linux, Your O/S comes with the drivers you need pre-installed. You do not need to
perform t
his step. You may skip directly to “Installing Betaflight Configurator”.
If you are on Windows, you must install the drivers manually. This is a place where beginners often
struggle. We’re going to present the steps here, and if you can follow them, then g reat, but many people
won’t be able to follow them. If you need a more personal approach, here is a link to a video that walks
you through the process in more detail.
All About Betaflight Drivers, Including How to Install Them
https://www.youtube.com/watch?v=m4ygG6Y5zXI
The video linked above shows a process of using Zadig to replace the VCP driver. The ImpluseRC Driver
Fixer is an easier way of doing the same thing. The instructions below will show how to use the
ImpulseRC Driver Fixer.
Here are the steps you will perform:
1. Download the Virtual COM Port (VCP) driver installer from here . Unfortunately, you must either
create a login or give them your email address, then wait for them to email you a link, to
download the actual installer. We recommend that you cre
ate a user login because the “send
you a link in an email” method sometimes takes a long time to go through.
a. To create a login at the STM site, first go to this URL .
b. Click “Create an Account”
c. Enter your information in the next page and click “Register”
d. You will receive a confirmation email. Complete the confirmation process.
e. Log in to the STM site using the login you just created and download the VCP driver
installer from the link in step 3.
2. Run the VCP installer and let it finish.
3. Download the ImpulseRC Driver Fixer from here .
4. Run the ImpulseRC Driver Fixer. It will instruct you to plug in your flight controller.