Holybro KOPIS 1, Руководство пользователя и инструкция по установке

Страница: 24 / 42

[Type here] [Type here]
P a g e | 22 KOPIS 1
Adjusting Channel Endpoints on a Taranis Radio
1. Press Menu to enter the menus. Then press Page until you come to the Outputs screen, as
shown below.
2. Scroll up or down to highlight the channel that you want to adjust. Press ENTER.
3. Scroll down to move across the line until you highlight the Min value as shown above on the Roll
axis.
6. Press ENTER to select the channel Min value. Hold the stick at its minimum position (full left or
full down). While watching the channel in the Receiver tab, scroll up or down until the Receiver
Tab shows 1000 for the channel.
7. Press EXIT to back out one time. Scroll to select the channel Max value. Hold the stick at its
maximum position (full right or full up). While watching the channel in the Receiver tab, scroll up
or down until the Receiver Tab shows 2000 for the channel.
8. Repeat the above steps to adjust the endpoints for all four channels: Throttle, Pitch, Roll, and
Yaw.
9. Press EXIT to back out of the menu.