Slide the GPS Mode Switch button up at the right side to position “ON”, and you can
hear two beeps. Check the icon “ ” on the LCD screen to confirm GPS is on.
Slide the GPS Mode Switch button down at the right side to position “OFF”, and you
can hear one beep. Check the icon “ ” on the LCD screen to confirm GPS is off.
Return to Home (RTH)
Press the button to start the RTH, the transmitter makes a beep sound and the
drone will fly back to the recorded Home Point.
Press the RTH button again to exit RTH procedure and regain control of the drone.
-08-
Photo/ Video
Speed Switch
Long-press the button “ ” in the upper right corner, the LCD screen showing
“ ”, and you will hear a beep, which means the drone is at the low speed.
Long-press the button “ ” in the upper right corner, the LCD screen showing
“ ”, and you will hear two beeps, which means the drone is at the high speed.
GPS Mode Switch
Press and hold the button ” “ for 3 seconds, the motor will stop immediately.
Emergency Stop
Short-press the button and the camera icon “ ” on the LCD screen flashes once,
the camera takes one photo.
Long-press the same button, the video icon “ ” on the LCD screen flashes slowly
the camera is
taking video. Long-press again will exit shooting.
When the drone is not inserted with TF card
(NOT Included)
or the TF card is
malfunction, photos and videos taking can not be done by pressing the button of
the transmitter.
