Holtkamp Electronics MAXI 3300MC english techn. stand 09.2017 4019_11.2017 V09.2019
- 12 -
8.5
Operating the first time
If the MAXI is installed completely, you can take into operation by
switching on the circuit.
As soon as the circuit is activated, appears in the display an
information about the operation mode of you MAXI and about
the used software. After that appears in the display a zero. The
MAXI is now ready for operation and can now be programmed as
you like. To ensure, that the programming has been correct, you
should make a detailed test run.
After this test run all counters should be deleted to receive a
correct account.
0.5
0.10
0.10
-
0
Connection 230 V
Remote start
(potential free)
March 2003 110% shutdown
according to standard EN 60335-2-27/A11 (VDE 0700
part 27). As of May 2003 are all MAXI devices automati-
cally made according to the regulations above with re-
commended shutdown.
EN60335-2-27:
The PCB of MAXI is provided with a 110%-disconnection. It me
-
ans, that an emergency stop timer is controlled by a third relay
on the PCB. It guarantees the switching off of the sun bed, if the
main relay is not switching off once, after the expired time.
8.6 The
function run
- Insert coins, till the complete price is paid. The amount, which
must be paid, appears in the display backwards running.
- The pre-run time runs. In the display appears the main time.
- As soon as the pre-run time is run out or the remote start has
been activated, the main time begins. This is shown with a flas-
hing point in the display.
- If the main time has run, the run-out time begins (cooling down
phase). In the display appears a bar.
- After end of the run-out time the MAXI is free for the next pay-
ment. In the display appears:
