Installation Instructions
1. You will find the installation easier if you remove the mattress. Place the assembled Rail on top of the boxspring
2. Run the long webbing (part F)
across the boxspring and then
underneath, back to the Bed grab rail.
IMPORTANT : For your safety, it is mandatory to install the safety strap set (parts F) provided with this bedrail as shown above
.
Care and Maintenance
Clean frame with soap and water, dry with
towel.
Periodically check the straps and handles to
make sure they are not torn, worn or
missing. Replace if necessary.
Valentine International Ltd.
221 Hsichih District, New Taipei City
Taiwan R.O.C.
Medica Surgical Innovations Limited
BB2 4PB, United Kingdom
Made in China
4. Replace the mattress on the bed, if you removed it.
5. Lie on the bed and position the Bed grab rail where it is most comfortable for you.
6. Tighten the two webbing straps securely against the boxspring, ensuring that the webbing straps are straight and parallel.
7. Loop and double tie the loose end of the long webbing directly underneath the buckle.
Tuck excess webbing securely out of the way to prevent tripping hazards.
3. Feed the long webbing through the buckle (part
G) at the desired lenght. Close the buckle to secure
the strap. Repeat on other side.
PRESS TO OPEN
RELEASE TO CLOSE
G
G
F
F
2
F
3
G
1
4
Persons with severe disabilities or persons
who are unable to walk without an aide
should not attempt to use this product
without assistance.
Maximum user weight : 135 kg
4
Service Clients
HOLTEX
30 rue Jean de Guiramand – 13290 Aix-en-Provence – France
[email protected] – www.holtex.fr
Hol
te
x
V1
-3
1
.0
5.
2
0
1
9
