Programming the Essex Keypad
1
Enter “Master Code”.
2
Enter 119 (3 beeps).
3
Enter User Code 5.
4
Wait 5 seconds for 3 reset beeps.
Set User Code 5
Step
Action
1
Enter Master Code .
2
Enter address of code to be deleted (111, 113, etc.).
3
Do not enter any code until you hear 3 reset beeps.
4
Wait 5 seconds for 3 reset beeps.
Delete Any Code
Step
Action
Note: User codes can be 3 to 8 digits
1
Enter any User Code (1 -5).
2
Enter “7”. This will cause the relay to latch (subject to the jumper pin settings - see Page 5).
3
To unlatch the relay, re-enter the user Code, followed by “7”.
Step
Action
Latch a Relay
1
Enter “Master Code”.
2
Enter 117 (3 beeps).
3
Enter User Code 4.
4
Wait 5 seconds for 3 reset beeps.
Set User Code 4
Step
Action
Page 8
TYPE 1.1.0.3-RF
