Door Ring Patterns
Door 1 3 groups of 3 rings (ring ring ring), (ring ring ring), (ring ring ring).
Door 2 3 groups of 2 rings (ring ring), (ring ring), (ring ring).
Operation of TES2
ANSWER THE CALL
When you heat the distinctive ring pattern selected above:
within 10 seconds -
simply pick up any telephone to be connected to the door speaker which initiated the call.
after 10 seconds -
pick up any telephone, flash, and you will be connected to door 1. To be connected to door 2, pick up
telephone, flash, and hit “2
CALL WAITING
TES2 has built-in call waiting. If the house phone is in use when the door button is pushed, the caller will receive a call
waiting tone. To answer the “door call” simply flash to answer the “door call” and flash again to return to the original call.
SWITCH TO OTHER DOOR
Users can switch to the other door station at anytime by hitting “1” or “2” while connected to door 1 or door 2.
Operation of T-RLY
If the TES2 Relay board is installed, the door latch/gate relay can be activated by pushing “6”. The relay will be activated for 5 sec-
onds,. To increase the activation time, hold down the “6” key for the desired amount of time.
Optional T-Rly Board (9408-3)
Page 10
TYPE 6.2.0.7-RF
TES2 Telephone Entry System
NC1
C
NO1 NC2
C
NO2
Door 1
Door 2
