11
1.
The UFU will announce a greeting followed by its charge
status. Verify the UFU is at least 50% charged prior to starting
the procedure.
2.
When an image of the probe keypad with a flashing
‘
M
’
button is displayed, the UFU is ready to link with a
TruNode®
Probe.
3.
Clamp the UFU securely to an IV pole in a location that is easy
to see by the user.
NOTE: After connecting to a probe, the UFU must be turn
ed ‘off’
then bac
k ‘on’ b
efore attempting to connect to a new probe.
Deploying the Probe
1.
Remove the Probe from the sterile peel-pouch, using
aseptic technique.
2.
Activate the Probe by pressin
g and holding ‘M’ button until the
light on the Probe keypad flashes. This indicates the Probe has
been activated. The live
TruNode®
application will start when the
UFU senses the Probe.
Flashing
‘M’ button on UFU indica
tes ready to link
