Hologic Genius, Руководство оператора

Страница: 47 / 80

I
MAGE
M
ANAGEMENT
S
ERVER
D
ASHBOARD
3.6 Genius™ Image Management Server User’s Manual
3
Archiver Status
Under normal operating conditions, when the Archiver Status is Ready , there are no actions
required to archive data from the Image Management Server.
Current time settings for the daily archive
The
Start On
field on the dashboard is the time that the daily archive starts.
The Max runtime on the dashboard is the duration that the daily archive will run. An unlimited max
runtime will continue archiving until all of the eligible cases are archived. The max runtime can be
set to a specific number of hours.
For example, if the Start On time is 2 a.m. and the Max runtime is 4 hours, the Image Management
Server will stop archiving eligible images at 6 a.m. each day. If the Start On time is 2 a.m. and the Max
runtime is unlimited, the Image Management Server will run until all of the eligible images are
archived.
Change start or duration of daily archive
After the initial system set-up, there may be no need to change any archive setting. However, a user
with System Administrator rights on the server can change the start time and the runtime for the
archiving service. In the event that the start time or runtime needs to change:
1. To change the starting time for the daily archive, click the down-arrow next to the current Start
On time and select a new time.
2. To change the duration of the daily archive, click the down-arrow next to the Max Runtime
and select a new time.
3. Enter your username. The user must have System Admin rights.
4. Enter your password.
5. Click the
Update Archiver button. This applies the changed settings.
6. Click the
Test Archiver
button. This tests that communication between the archive storage
system and the server is not disrupted by the changed settings.
Plugable retriever and http port
The
Plugable Retriever information on the dashboard describes the archive storage
system device configured with this Image Management Server. When configured correctly,
the plugable retriever is the same device as the plugable archiver.
The
http port in the retriever section of the dashboard displays the name of the port
through which the retriever transfers data from the archive storage system to the Image
Management Server. The archiver and retriever are installed and configured by qualified
Hologic service personnel.
Retrieve History
Refer to “Retrieve history” on page 3.9.
Test Retriever
The Test Retriever is used by qualified Hologic service personnel to confirm that the current
settings are properly set up for retrieving slides from the archive storage system.
Key to Figure 3-2
10
11
12