Hologic Genius, Руководство оператора

Страница: 37 / 80

Genius™ Image Management Server User’s Manual 2.3
2
I
NSTALLATION
• If placed on a countertop, the rubber-footpads provided with the network switch must be
installed to prevent movement and improve airflow.
• Network switch must be easily accessible on all sides to accommodate proper servicing.
Network requirements for the network switch
• The network switch is a Layer 3 type switch.
• The network switch has a minimum of twelve RJ-45 Ethernet ports with 10 Gbps.
MOVING THE IMAGE MANAGEMENT SERVER
If it becomes necessary to change the location of your Image Management Server, contact Hologic
Technical Support or your local Hologic distributor. Collaboration between your IT staff and Hologic
is required, and a service visit may be necessary.
Unit Shipped to New Location
If the Image Management Server is to be shipped to a new location, please contact Hologic Technical
Support or your local Hologic distributor. Refer to Chapter 8, Service Information.
CONNECTING IMAGE MANAGEMENT SERVER COMPONENTS
If it becomes necessary to change the archive storage system connected to your Image Management
Server, contact Hologic Technical Support or your local Hologic distributor. A service visit is
required.
The Genius Digital Diagnostics System components must be fully assembled before turning on the
power and using the instrument. Hologic service personnel will install and configure the system
components.
A network connection (see Figure 1-5) connects the Review Station to a networking device, enabling
communication to the Genius Image Management Server.
Note:
It is the responsibility of the customer to purchase and install the necessary quantities and
lengths of Ethernet cable required for networking the Review Station to the system.
Installation configuration should be planned prior to instrument installation.
SECTION
D
SECTION
E