OSCILLATION INSTRUCTIONS
1. Turn the mode control to the desired comfort setting and press the
oscillation button “on”
2. To stop oscillation, press the oscillation button “off ”.
3. Please do not manually turn the unit, it is designed to turn only by motorized
oscillation.
CLEANING/MAINTENANCE
During Season Care:
1. Always unplug the heater before cleaning
2. Clean the unit with a soft cloth moistened with a mild soap solution.
3. NEVER use abrasive or flammable solvents to clean the unit.
4. After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
1. Store heater in a cool, dry location
2. Holmes recommends that you store the unit in its original carton.
TROUBLESHOOTING
If your heater fails to operate:
* UNPLUG THE UNIT
* Make sure the electrical outlet or circuit breaker is working.
* Check for obstructions. If you find an obstruction turn the heater OFF,
and unplug the unit. Carefully remove the obstruction and follow
the reset instructions.
* The temperature may be set too low. Turn the thermostat knob
clockwise until the heater restarts.
* Make sure mode control is in LO or HI setting.
If your heater fails to oscillate:
* Make sure the oscillation button is pressed.
Please DO NOT attempt to open or repair the heater.
Please see the Warranty for Service Instructions.
H-H129.01 MCH3700 GRAVES manual
pg 4
pg 5
