Holman qt14, Руководство пользователя

Страница: 19 / 28

IF FURTHER ASSISTANCE IS REQUIRED:
CONTACT STAR/HOLMAN FACTORY SERVICE TEAM AT 1-800-807-9054
17
Note: During factory assembly, a 1/8” side-to-side
play is adjusted into the driveshaft to allow for
chassis expansion.
1. Unit must be cool
2. Do not adjust the sprocket on the driveshaft.
3. Insert a 1/16” spacer (drill bit etc) between the
driveshaft sprocket and the washer that is
outside the bearing.
4. Measure the distance “A” while holding the
sprocket against the spacer.
5. Adjust the sprocket on the drive motor so that
dimension “B” is equal to “A”
+
/
-
1
/
16
”.