OPERATOR'S MANUAL
HOLMAN CONVEYOR TOASTERS
MODEL DT14
UNCRATING AND INSPECTION
Unpack unit and components from container. Remove all visible packing material and inspect unit for damage. If
damage is discovered, call the factory immediately and tell us the extent of the damage.
ELECTRICAL INSTALLATION
WARNING:
A CERTIFIED, LICENSED ELECTRICIAN MUST ELECTRICALLY INSTALL THIS UNIT.
WARNING:
Make sure all input power is
off
before installing or removing any parts.
WARNING:
Before installing unit(s), check with local power company to determine actual voltage at job site.
Never use a 208-volt unit into 240 volts or a 240-volt unit into 208 volts.
WARNING:
Be absolutely sure the ground connection for the unit is properly wired. Never connect unit to power
without proper ground connections. Improper ground may result in severe injury or fatality.
INSTALLATION INSTRUCTIONS
Attach the two load-up trays by hooking each tray over the mounting pins located on the side of each conveyor
extension as shown above.
LOAD UP TRAYS
TOAST CHUTE
